Zebex Z-6070 Series Spezifikationen PDF herunterladen (Seite 11)

Power Connection

The interface cable can support direct power or external

power to scanner. If external power has been inserted to the

cable power jack, it will automatically switching off the direct

power from host to scanner.

If your host does not provide power to the scanner, you will

need an external power connection to the scanner:

1. Connect the interface cable to the bottom of the

scanner, as described in How to connect the

scanner.

2. Connect the other end of the interface cable to the

host (refer to your host manual to locate for correct

port).

3. Plug the power supply into the power jack on the

interface cable.

4. Plug the other end of the power supply into an AC

outlet.

Note:

1. Although, the Z-6070 can use direct power from host

device, but if the Host (computer) doesn’t provide

sufficient current for scanner, sometimes it will cause

interference and affects the scanner or PC, this is also

the reason why a scanner could work more sufficiently

on a computer but not others.

2. The host system should be capable to supply a minimum

of 300mA of current @ 5VDC.

3. In order to obtain the best steady operation, ZEBEX

recommends using the external power supply provided

with the Z-6070 when connect to keyboard wedge or

USB host.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 38 39

Keine Kommentare

Zebex Z-6070 Series Spezifikationen Seite 11